Skip to main content

OmniROM 12.1 v3 (Tablet) (ARM64) for Orange Pi Zero 2W / Zero 3

 This is OmniROM 12.1 Tablet variant for Orange Pi Zero 2W /  Zero 3.


TWRP is included. 


Source code:

blog


Included TWRP has lots of bugs, especially the UI. But it works well enough to be able to install gapps etc.

Download gapps: GitHub 

reboot to recovery mode. TWRP advanced > add side load > swipe to enable 

adb sideload MindTheGapps-12.1.0-arm64-20231025_200924.zip


Welcome ui after gapps installation.



Unzip the file before using in Phoenix card.

It should be flashed to sd card using Phoenix card. Same as the OEM image instructions.


DOWNLOAD:

For Orange Pi Zero 2W:

omni-12.1_20241209_arm64_zero2w.zip


For Orange Pi  Zero 3:

omni-12.1_20241209_arm64_zero3.zip



Comments

  1. love and hateJanuary 12, 2025 at 10:03 AM

    does it work with 1gb models?

    ReplyDelete
  2. Romaster85January 19, 2025 at 6:12 PM

    Oooh the v3 is here!! I test it!! Tks! 🎉🎉🍻

    ReplyDelete
  3. Romaster85February 27, 2025 at 9:13 PM

    Please could you check the vulkan drivers? I'm not able to get them to work and it's something that could significantly increase performance in some emulators and video games.
    I have the Orange Pi Zero 2W 4GB RAM

    ReplyDelete
  4. CaoXMarch 5, 2025 at 9:45 AM

    Hi , i have a Orange pi Zero 3 , how do i boot into twrp ?

    ReplyDelete
    Replies
    1. CaoXMarch 5, 2025 at 11:15 AM

      the way i found is using debuggin over wifi , and using adb reboot recovery , but cannot mount drives , any help please

      Delete
  5. Moreira5March 22, 2025 at 2:39 AM

    Bootloop here in OrangePi Zero 3....

    ReplyDelete

Post a Comment

Popular posts from this blog

OmniROM 12.1 v2 (ARM64) for Orange Pi Zero 2W / Zero 3

This is an update for my earlier port of OmniROM 12.1 for Orange Pi Zero 2W /  Zero 3 . This build is ARM64. It can run both 32 and 64 bit apks. The sources are available at this  blog . There are some graphics libraries that don't have 64 bit versions. I have used the available 32 bit versions of them but the eventual goal will be to replace the proprietary  libraries  with open source GPU drivers like mesa3d panfrost .   Unzip the file before using in Phoenix card. It should be flashed to sd card using Phoenix card. Same as the OEM image instructions . DOWNLOAD: For Orange Pi Zero 2W: omni-12.1_20241018_arm64_zero2w.zip For Orange Pi  Zero 3: omni-12.1_20241018_arm64_zero3.zip
27 comments
Read more

OmniROM 12.1 v1 for Orange Pi Zero 2W

I ported this build of OmniROM Android 12.1 for Orange Pi 2W. It is made for tablets, unlike the one that manufacturer provides for TV. The sources are available at this  blog . It should be flashed to sd card using Phoenix card. Just like the oem image. Download: omni-12.1_20240901_apollo_p2.img Compressed version (unzip before using): omni-12.1_20240901_apollo_p2.zip
Post a Comment
Read more

OmniROM 12.1 v0.1 for Orange Pi Zero 3

 This is a port of OmniROM Android 12.1 for Orange Pi Zero 3. UPDATE (09/12/2024): It is confirmed to boot. It is not tested to boot on Orange Pi Zero 3 but should most likely work. This article will be updated after enough confirmations. There were only few differences from 2W in oem sources so I am providing this build based on my pi 2w  port . Its made for tablets, not TV image like oem. The sources are available at this  blog . Notifications on pi 2w It should be flashed to sd card using Phoenix card. Just like the oem image. Download: omni-12.1_20240909_apollo_p2_zero3.img Compressed version (unzip before using): omni-12.1_20240909_apollo_p2_zero3.zip
2 comments
Read more