OmniROM 12.1 v3 (Automotive) (ARM64) for Orange Pi Zero 2W / Zero 3

This is alpha release for Android automotive variant for Orange Pi Zero 2W / Zero 3.

It is just for testing android automotive and not stable enough for daily use.

TWRP is included.

Source code:

blog

Unzip the file before using in Phoenix card.

It should be flashed to sd card using Phoenix card. Same as the OEM image instructions.

DOWNLOAD:

For Orange Pi Zero 2W:

omni-12.1_car_20241210_arm64_zero2w.zip

For Orange Pi Zero 3:

omni-12.1_car_20241210_arm64_zero3.zip

Comments

OmniROM 12.1 v1 for Orange Pi Zero 2W

I ported this build of OmniROM Android 12.1 for Orange Pi 2W. It is made for tablets, unlike the one that manufacturer provides for TV. The sources are available at this blog . It should be flashed to sd card using Phoenix card. Just like the oem image. Download: omni-12.1_20240901_apollo_p2.img Compressed version (unzip before using): omni-12.1_20240901_apollo_p2.zip

OmniROM 12.1 v2 (ARM64) for Orange Pi Zero 2W / Zero 3

This is an update for my earlier port of OmniROM 12.1 for Orange Pi Zero 2W / Zero 3 . This build is ARM64. It can run both 32 and 64 bit apks. The sources are available at this blog . There are some graphics libraries that don't have 64 bit versions. I have used the available 32 bit versions of them but the eventual goal will be to replace the proprietary libraries with open source GPU drivers like mesa3d panfrost . Unzip the file before using in Phoenix card. It should be flashed to sd card using Phoenix card. Same as the OEM image instructions . DOWNLOAD: For Orange Pi Zero 2W: omni-12.1_20241018_arm64_zero2w.zip For Orange Pi Zero 3: omni-12.1_20241018_arm64_zero3.zip

OmniROM 12.1 v0.1 for Orange Pi Zero 3

This is a port of OmniROM Android 12.1 for Orange Pi Zero 3. UPDATE (09/12/2024): It is confirmed to boot. It is not tested to boot on Orange Pi Zero 3 but should most likely work. This article will be updated after enough confirmations. There were only few differences from 2W in oem sources so I am providing this build based on my pi 2w port . Its made for tablets, not TV image like oem. The sources are available at this blog . Notifications on pi 2w It should be flashed to sd card using Phoenix card. Just like the oem image. Download: omni-12.1_20240909_apollo_p2_zero3.img Compressed version (unzip before using): omni-12.1_20240909_apollo_p2_zero3.zip

Yajat blogs

Search This Blog